15.6-Inch Touch Query Kiosk Board for Bank Branch Lobby, WF-K3288, AndroidSBC, Prague

TL;DR: 15.6-Inch Touch Query Kiosk Board for Bank Branch Lobby

AndroidSBC sourcing desk: touch query board pricing held flat through the current quarter serving Prague, Czech Republic. The WF-K3288 self-service query terminal Android motherboard spans the legacy query terminal refresh with hall display and eleven sister models in the WF-K series, all built on the RK3288 quad-core ARM Cortex-A17 1.8GHz SoC with the ARM Mali-T764 GPU, 1080p HDMI plus LVDS, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-K family from the Longgang source factory in Shenzhen to Prague and Czech Republic importers who run hospital information points, bank branch lobbies, government service halls, mall directory stations, airport concourses and outdoor query cabinets.

About AndroidSBC and the Self-Service Query Terminal Android Motherboard Family

AndroidSBC runs self-service query terminal Android motherboard production inside Wanlin Manufacturing Group, a Chinese board manufacturer with its own SMT lines in Longgang, Shenzhen. For Czech Republic importers the practical point is that the WF-K series keeps one twelve-model catalogue, one driver SDK and one compliance file set across every tier a Prague project might need. Purchasing runs through the Shenzhen export desk, so Prague buyers deal with the manufacturing entity rather than a trading layer.

WF-K3288 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-K3288 (legacy query terminal refresh with hall display) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Czech Republic importers sourcing the WF-K family, the WF-K3288-A variant is the typical configuration for the installed-base query terminal refresh use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Self-Service Query Terminal Android Motherboards for Czech Republic Buyers

Many Czech Republic integrators under-estimate the peripheral side of a query terminal. The board is one line item, but the printer, scanner, card reader and touch drivers decide whether Prague can actually ship a working station.

The third constraint is the evidence pack. Prague integrators bidding on public work in Czech Republic are routinely asked to show the CTU trail behind CE marking with CTU radio interface notification, which is where a factory-direct supplier earns its place. That is the backdrop for the Prague programme: a 40600-unit requirement placed on September 22, 2026 and routed through the Hamburg - Shenzhen lane to keep the schedule honest.

Competitive Comparison: WF-K3288 vs Competing Self-Service Query Terminal Android Boards

Compared with the general query boards Prague buyers see quoted for Czech Republic, the WF-K configuration differs mainly in platform breadth and in what ships in the carton.

• Platform breadth: twelve models on eight chips (RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing driver stack or mounting pattern.
• Bundled integration: touch, printer, scanner, card reader, camera and voice driver SDK ships in the carton; competing query boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing query boards reaching {city}.

Global Self-Service Query Terminal / Information Kiosk Market Trends

The self-service query market sits inside the broader kiosk expansion, but it behaves differently: replacement cycles are longer and the peripheral stack matters more. Czech Republic buyers in Prague therefore tend to standardise on one board family rather than mixing vendors per site.

• Volume shift to board-level sourcing: more integrators now buy the motherboard rather than the finished kiosk, which is why the WF-K3288 and WF-K8801 tiers ship in board form with the enclosure left to the local partner.
• Dual-screen becomes the default: hall display plus touch query on one board is replacing two separate devices, and the WF-K8801 and WF-K3600 configurations address that pattern directly.
• Longer service life expectations: operators now plan five to seven years per query terminal, which favours a fixed BOM such as the WF-K3600 over boards that re-spin silicon between lots.

In Czech Republic the winners so far are the integrators who standardised early on one query board family, which is the pattern AndroidSBC sees across Prague accounts.

Partner Success Story: Loire Accueil Numerique (public service reception specialist)

A recent Loire Accueil Numerique deployment in the France public service segment shows how the WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Prague integrators. Loire Accueil Numerique installed 40600 query terminals in public reception halls.

• OEM relationship: AndroidSBC private-label SKU shipped with Loire Accueil Numerique branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive touch, thermal printer, receipt printer, document scanner, A4 printer, barcode scanner, QR code, NFC, RFID, card reader, ID reader, face recognition, voice module, speaker amplifier and microphone.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus CTU conformity, all bundled into the Shenzhen source-factory shipment.

Loire Accueil Numerique Directeur Technique for France Public Service highlighted: Loire Accueil Numerique paired an entrance touch terminal with a high-brightness hall display, and the 40600 WF-K units shipped to Prague arrived as a matched pair on one board.

Field Report: installed-base query terminal refresh at a social security service hall

YANTIAN, Shenzhen, September 22, 2026 - Jin Tao, AndroidSBC field desk. Burn-in for the WF-K3288 batch ran the touch, printer and card reader loops simultaneously, which is the combination Czech Republic integrators actually meet in the field. The WF-K3288 self-service query terminal Android motherboard order for Prague, Czech Republic cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.

The WF-K3288 legacy query terminal refresh with hall display production lot includes the WF-K3288-A variant as the typical configuration, with touch panel, thermal printer and document scanner driver SDK plus staged OTA management bundled into the source-factory shipment. For Czech Republic integrators, the CTU conformity plus CE marking with CTU radio interface notification paperwork is bundled.

Filed by Jin Tao, AndroidSBC field desk, YANTIAN, Shenzhen. Czech Republic integrators typically request CE plus local radio interface notification for self-service query terminal board deployments.

WF-K3288 Application Scenarios

The WF-K3288 legacy query terminal refresh with hall display sits inside a twelve-variant WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-K3288-A configuration is the typical build for the installed-base query terminal refresh use case, with touch panel and identity peripheral driver SDK plus staged OTA management bundled.

• Hospital and clinic information points: the WF-K3288 drives a touch query station at the entrance while the hall display shows the same information set to waiting visitors in Prague.
• Bank and financial branch lobbies: touch query plus counter display from one board, with card reader and ID reader integrated for account and product lookups.
• Government service halls: the WF-K3399 runs tax, social security and real estate information lookup, with printing available on the same board.
• Shopping mall directories: the WF-K1330 serves mall directory and wayfinding lookup, with the advertising screen running an independent content loop.
• Airport and train station concourses: high-brightness information query where the WF-K1331 has to stay readable under strong ambient light.
• Retail and pharmacy price or product lookup: compact stations where the WF-K6180 fits a narrow counter without structural work.
• Outdoor and unheated information cabinets: the industrial tier holds the wide temperature window and 7x24 duty cycle for street-level query points.
• Multi-language public information points: on-screen lookup in more than one language from a single board, with voice assistance where the venue requires it.
• Retrofit programmes in Prague: the same board re-uses the existing enclosure, panel and mounting pattern so an installed estate can be upgraded board by board.

Partnership Models for Prague Buyers

For Czech Republic buyers the working models are three: a distribution track, an integration track and a private-label track, all open to Prague teams.

• Distribution track: the partner buys the WF-K board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-K board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

AndroidSBC does not require exclusivity on any of the three tracks, which is deliberate: Prague integrators working across several Czech Republic verticals need room to run different models side by side.

Frequently Asked Questions

Does the WF-K self-service query terminal Android motherboard family support a legacy query terminal refresh with hall display?

Answer: Yes. The legacy query terminal refresh with hall display is supported out of the factory image, and AndroidSBC validates it again on the production lot before the Czech Republic shipment leaves Shenzhen.

What is the real difference between the RK3288 tier and the other silicon tiers in the WF-K family?

Answer: The difference is workload envelope, not compatibility. A board on the RK3288 tier runs the same factory image as the rest of the WF-K family, which keeps spare parts interchangeable across a Czech Republic estate.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Czech Republic?

Answer: Yes. The conformity pack for Czech Republic is prepared by the factory, not by the Prague integrator, which removes the usual delay between arrival and installation.

What are the MOQ and lead time for a first order of the WF-K self-service query terminal family?

Answer: AndroidSBC keeps the first-order MOQ low specifically so Prague integrators can test the board inside a real Czech Republic project before placing an estate-scale order.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-K family?

Answer: Yes, and this is one of the most common requests from Prague integrators. Custom boot behaviour, pre-installed applications, kiosk-mode restrictions and custom Linux images are all handled at the factory for Czech Republic projects.

How are software updates and long-term support handled on the WF-K family?

Answer: The WF-K family carries a seven-year update commitment, staged OTA delivery and rollback capability, which lets Prague partners keep Czech Republic sites on one validated revision.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-K family?

Answer: Yes. AndroidSBC ships to Amazon FBA and 3PL consolidation warehouses, including labelling, carton marking and pallet configuration matched to the Czech Republic destination that Prague buyers specify.

How are RMA and DOA replacements handled on the WF-K self-service query terminal family?

Answer: RMA handling on the WF-K family runs against the lot record, so Prague partners get a traceable answer rather than a generic replacement, and Czech Republic estates stay on matched firmware.

Contact AndroidSBC: Start Your WF-K3288 Sourcing Conversation

For the WF-K self-service query terminal Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Prague integrators:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Prague and Czech Republic buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-K family.