Self-service Query All-In-One Motherboard for Bank Branch Lobby, WF-K8801, AndroidSBC, Prague

TL;DR: Self-service Query All-In-One Motherboard for Bank Branch Lobby

AndroidSBC release: twelve-model WF-K self-service query terminal motherboard family opens for volume orders serving Prague, Czech Republic. The WF-K8801 self-service query terminal Android motherboard spans the AI face recognition self-service query terminal and eleven sister models in the WF-K series, all built on the RK3588 octa-core ARM Cortex-A76 2.4GHz plus Cortex-A55 64-bit SoC with the ARM Mali-G610 MP4 GPU, 4K HDMI plus dual LVDS independent display, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-K family from the Longgang source factory in Shenzhen to Prague and Czech Republic importers who run hospital information points, bank branch lobbies, government service halls, mall directory stations, airport concourses and outdoor query cabinets.

About AndroidSBC and the Self-Service Query Terminal Android Motherboard Family

Wanlin Manufacturing Group builds boards and nothing else, which is why the WF-K query terminal line is sold factory direct through AndroidSBC. Twelve models cover hospital, bank, government, retail, transport and outdoor query duty, and each one leaves the Longgang line in Shenzhen with the same peripheral driver bundle for Prague integrators. Purchasing runs through the Shenzhen export desk, so Prague buyers deal with the manufacturing entity rather than a trading layer.

WF-K8801 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-K8801 (AI face recognition self-service query terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Czech Republic importers sourcing the WF-K family, the WF-K8801-A variant is the typical configuration for the ID-verified self-service query deployment use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Self-Service Query Terminal Android Motherboards for Czech Republic Buyers

Sourcing a self-service query terminal board for Czech Republic is not only a chip question. A Prague integrator has to align the touch stack, the printer and scanner drivers, the enclosure cut-outs and the compliance file set before a single unit reaches the field.

Compliance and logistics compound each other. Boards for Prague move through Port of Hamburg, and any mismatch between the CTU documents and the CE marking with CTU radio interface notification route applied in Czech Republic surfaces at exactly the wrong moment. For Czech Republic buyers the effect is that a 17400-unit order for Prague repeats identically the 6th time it is placed, down to the firmware revision.

Competitive Comparison: WF-K8801 vs Competing Self-Service Query Terminal Android Boards

For a Prague project the comparison is not a single chip benchmark. It is what the board carries into Czech Republic deployment as standard.

• Platform breadth: twelve models on eight chips (RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing driver stack or mounting pattern.
• Bundled integration: touch, printer, scanner, card reader, camera and voice driver SDK ships in the carton; competing query boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing query boards reaching {city}.

Global Self-Service Query Terminal / Information Kiosk Market Trends

Self-service query terminals are moving from a specialist niche into standard public infrastructure, and Czech Republic is part of that shift. Demand for the AI face recognition self-service query terminal is being pulled by service halls that want to shorten front-desk queues and by operators in Prague who need the same answer available outside staffed hours.

• Volume shift to board-level sourcing: more integrators now buy the motherboard rather than the finished kiosk, which is why the WF-K8801 and WF-K3602 tiers ship in board form with the enclosure left to the local partner.
• Dual-screen becomes the default: hall display plus touch query on one board is replacing two separate devices, and the WF-K3602 and WF-K3566 configurations address that pattern directly.
• Longer service life expectations: operators now plan five to seven years per query terminal, which favours a fixed BOM such as the WF-K3566 over boards that re-spin silicon between lots.

For Prague the opportunity sits in service coverage: operators in Czech Republic are adding information points faster than they are adding staff, and that gap is what the query terminal fills.

Partner Success Story: Loire Accueil Numerique (public service reception specialist)

A Loire Accueil Numerique rollout in the France public service segment shows how the WF-K self-service query terminal family works in practice for Prague integrators. Loire Accueil Numerique installed 17400 query terminals in public reception halls.

• OEM relationship: AndroidSBC private-label SKU shipped with Loire Accueil Numerique branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive touch, thermal printer, receipt printer, document scanner, A4 printer, barcode scanner, QR code, NFC, RFID, card reader, ID reader, face recognition, voice module, speaker amplifier and microphone.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus CTU conformity, all bundled into the Shenzhen source-factory shipment.

As Loire Accueil Numerique Directeur Technique for France Public Service explained: Loire Accueil Numerique paired an entrance touch terminal with a high-brightness hall display, and the 17400 WF-K units shipped to Prague arrived as a matched pair on one board.

Field Report: AI face recognition query terminal rollout at a government service hall

BAOLONG, Shenzhen, September 22, 2026 - Meng Yang, AndroidSBC field desk. The WF-K8801 lot was soak-tested with the hall display and the touch panel running from one board, the configuration most Czech Republic projects specify. The WF-K8801 self-service query terminal Android motherboard order for Prague, Czech Republic cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.

The WF-K8801 AI face recognition self-service query terminal production lot includes the WF-K8801-A variant as the typical configuration, with touch panel, thermal printer and document scanner driver SDK plus staged OTA management bundled into the source-factory shipment. For Czech Republic integrators, the CTU conformity plus CE marking with CTU radio interface notification paperwork is bundled.

Filed by Meng Yang, AndroidSBC field desk, BAOLONG, Shenzhen. Czech Republic integrators typically request CE plus local radio interface notification for self-service query terminal board deployments.

WF-K8801 Application Scenarios

The WF-K8801 AI face recognition self-service query terminal sits inside a twelve-variant WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-K8801-A configuration is the typical build for the ID-verified self-service query deployment use case, with touch panel and identity peripheral driver SDK plus staged OTA management bundled.

• Hospital and clinic information points: the WF-K8801 drives a touch query station at the entrance while the hall display shows the same information set to waiting visitors in Prague.
• Bank and financial branch lobbies: touch query plus counter display from one board, with card reader and ID reader integrated for account and product lookups.
• Government service halls: the WF-K3601 runs tax, social security and real estate information lookup, with printing available on the same board.
• Shopping mall directories: the WF-K3602 serves mall directory and wayfinding lookup, with the advertising screen running an independent content loop.
• Airport and train station concourses: high-brightness information query where the WF-K3566 has to stay readable under strong ambient light.
• Retail and pharmacy price or product lookup: compact stations where the WF-K3288 fits a narrow counter without structural work.
• Outdoor and unheated information cabinets: the industrial tier holds the wide temperature window and 7x24 duty cycle for street-level query points.
• Multi-language public information points: on-screen lookup in more than one language from a single board, with voice assistance where the venue requires it.
• Retrofit programmes in Prague: the same board re-uses the existing enclosure, panel and mounting pattern so an installed estate can be upgraded board by board.

Partnership Models for Prague Buyers

Three partnership tracks serve the Czech Republic market, and Prague integrators can move between them as their own capability and volume change.

• Distribution track: the partner buys the WF-K board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-K board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

The tracks are not exclusive of each other, and Prague partners commonly run distribution on one product line and private label on another for the same Czech Republic customer base.

Frequently Asked Questions

Does the WF-K self-service query terminal Android motherboard family support an AI face recognition self-service query terminal?

Answer: Yes. The AI face recognition self-service query terminal is a stock configuration on the WF-K self-service query terminal Android motherboard family from AndroidSBC. All tiers are validated against the same firmware build and the same peripheral interface before shipment to Prague.

What is the real difference between the RK3588 tier and the other silicon tiers in the WF-K family?

Answer: The RK3588 tier is the right choice when the Prague deployment needs exactly its level of video decode and AI capability; above that the extra headroom is paid for but not used, and below it the board cannot sustain the workload.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Czech Republic?

Answer: Yes, and where Czech Republic requires a local registration step AndroidSBC supplies the technical file that the Prague partner submits, rather than leaving the integrator to reconstruct it.

What are the MOQ and lead time for a first order of the WF-K self-service query terminal family?

Answer: AndroidSBC sets a pilot-friendly MOQ on the WF-K family. Sample units reach Prague in 1-3 days, and a first bulk lot for Czech Republic runs 15-30 days from confirmation.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-K family?

Answer: Yes. The WF-K baseline is Android, but Czech Republic buyers frequently need a custom Linux image or a stripped Android build, and AndroidSBC delivers both from the Longgang engineering team for Prague.

How are software updates and long-term support handled on the WF-K family?

Answer: AndroidSBC supports field updates by staged OTA with rollback, plus local update packages where a Prague integrator needs to service Czech Republic sites without network access.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-K family?

Answer: Yes, and this is a standard route for Prague sellers. AndroidSBC prepares FBA-compliant cartons and labels for Czech Republic warehouses as part of the shipment rather than as a separate service.

How are RMA and DOA replacements handled on the WF-K self-service query terminal family?

Answer: AndroidSBC logs every board to its burn-in result, which is what makes RMA workable for Prague integrators running Czech Republic estates across many sites.

Contact AndroidSBC: Start Your WF-K8801 Sourcing Conversation

To start a WF-K self-service query terminal Android motherboard sourcing conversation with AndroidSBC, Prague integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Prague and Czech Republic buyers the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.