RK3588 Custom Android TV Board, WF-C3588-E7, AndroidSBC, Prague

TL;DR: RK3588 Custom Android TV Board

LONGGANG, Shenzhen, September 12, 2026 - The Rockchip RK3588 line at Wanlin Longgang closed lot 481 this week: 8,625 WF-C3588-E7 boards bound for Prague, Czech Republic, each unit traceable to its own burn-in barcode.

AndroidSBC production statement on Rockchip RK3588 custom board output serving Prague, Czech Republic. The WF-C3588 line is a custom motherboard programme built on the Rockchip RK3588 octa-core platform (4x Cortex-A76 at 2.4GHz plus 4x Cortex-A55 at 1.8GHz on 8nm) with a triple-core NPU delivering 6 TOPS of INT8 inference, 8K H.265 decode and up to 32GB of LPDDR4X or LPDDR5. AndroidSBC, the export arm of Wanlin Manufacturing Group, builds nine custom variants at the Longgang source factory in Shenzhen for Prague and Czech Republic buyers: WF-C3588-A0 custom Android motherboards, WF-C3588-I1 custom industrial boards, WF-C3588-M2 core boards and SOMs with carrier design, WF-C3588-S3 custom signage and video wall boards, WF-C3588-K4 custom kiosk and POS boards, WF-C3588-R5 custom robotics controllers, WF-C3588-N6 custom NVR boards, WF-C3588-E7 custom edge AI boards, and WF-C3588-P8 custom ARM PC and NAS boards.

About AndroidSBC and the Rockchip RK3588 Board Family

The WF-C3588 is a nine-variant custom motherboard programme from AndroidSBC, the export arm of Wanlin Manufacturing Group in Shenzhen. One Rockchip RK3588 silicon, nine custom categories: custom Android motherboards, custom industrial boards, core board and SOM work, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. Wanlin's Longgang plant handles SMT, burn-in and pre-shipment inspection in one building, and the export desk handles the CE, FCC, UKCA, RoHS and IEC 62368-1 file per lot. For Czech Republic importers, the line covers the custom board categories a Prague distributor is most often asked to quote.

WF-C3588-E7 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-E7 (Custom Edge AI Computing Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Czech Republic importers sourcing the WF-Series, the 16GB + 64GB (WF-C3588-E7-C) variant is the typical configuration for the custom edge AI computing programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom Edge AI Computing Board for Czech Republic Buyers

Buyers in Prague who have run the custom edge ai computing board category for a few years tend to stop shopping on price alone. The Rockchip RK3588 allocation is the real constraint, and it is the reason a 8,625-unit order can look cheap on paper and expensive in a slipped quarter. The software question follows immediately. The hardware spec sheet is easy to verify; the difference between a board that runs a launcher and a board that holds a certified, credential-locked stack only becomes visible after the first field update.

Documentation closes the list. Buyers in Prague have learned to ask for the test reports before the deposit, because a CE mark printed on a carton is worth nothing at the port without the Declaration of Conformity behind it. AndroidSBC moves all three risks inside the factory: the custom variant is assembled at Longgang, the certified image is burned on the same line, and the Technical File ships with the lot. Across the nine WF-C3588 variants the coverage runs from edge AI inference boxes, AI gateways, machine vision inspection, video analytics appliances, smart city nodes, factory AI retrofits, and edge computing servers, with three memory configurations per variant, so a Prague buyer can usually match a requirement from the standard custom range.

The Czech Republic paperwork question is settled before production. In the Czech Republic the industrial base buys through technical distributors, and the CE file is reviewed locally rather than accepted on the manufacturer declaration alone. The Longgang export desk prepares the destination-market file covering CE marking with CTU radio interface notification administered by CTU and releases it with the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), booking the lot into Port of Hamburg as the inland gateway on the Hamburg to Ningbo lane.

Competitive Comparison: WF-C3588-E7 vs Competing RK3588 Boards

The comparison set for the custom edge ai computing board socket breaks three ways: catalogue boards with fixed I/O and no engineering support, re-badged imports with a sticker but no schematic, and source-factory custom boards that carry the BSP, the test bench and the certification desk in-house. The WF-C3588-E7 is in the last group, and the separation comes from Rockchip RK3588, from customization depth, and from the per-lot certified image burn.

• vs GPU entry servers: the WF-C3588-E7 runs multi-model INT8 pipelines at a fraction of the power, which is what makes an unattended edge cabinet viable.
• vs cloud-analytics appliances: inference stays local on the 6 TOPS NPU, so the site keeps running when the uplink does not.
• vs NPU-less gateways: the board replaces the gateway plus a separate vision box with one SKU and one firmware line.
• vs assembled white boxes: Longgang validates the NPU runtime, the thermal profile and the appliance chassis together before the lot ships.

Global Custom Edge AI Computing Board Market Trends

Order timing in Czech Republic now follows the Custom Edge AI Computing Board curve rather than the old annual budget cycle. MarketsandMarkets sizes the Edge AI hardware segment at USD 26.9 billion for 2025 with a 32.7 percent CAGR to USD 108.2 billion by 2030 (MarketsandMarkets, 2025-2030), and that growth is the reference point Czech Republic buyers use when they argue about RK3588 allocation. In Prague, it shows up as three distinct demand patterns across the WF-C3588:

• Retail analytics box: a mall operator counts dwell time and demographics locally across hundreds of fanless nodes.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-E7 board carries that headroom without a board change.
• Smart city intersection: a traffic programme runs vehicle and pedestrian analytics on one sealed node per junction.

For the Custom Edge AI Computing Board category the practical signal in Czech Republic is that framework agreements are replacing spot buying, and the agreements are getting longer.

Read together, the three patterns explain the move in Prague from spot quotes to framework agreements released monthly, which is what a custom RK3588 motherboard programme needs to hold a twelve-month shipping window without a mid-year break.

Partner Success Story: Iris Building Systems in Prague, Czech Republic

Iris Building Systems, a smart building integrator serving the Czech Republic market, deployed 3,200 custom WF-C3588-I1 DIN-rail controller boards for a commercial tower programme. The rollout covered the retail analytics box, smart city intersection, and healthcare kiosk analytics workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 3,200 custom WF-C3588-I1 DIN-rail controller boards for a commercial tower programme
• Region: Prague, Czech Republic
• Models used: WF-C3588-E7 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Qingdao with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Hamburg as the inland gateway via the Hamburg to Ningbo lane

"We specified the I/O count, they routed the board. The DIN-rail clip, the conformal coating and the dual GbE uplinks were all line items on one quote from one factory, which is the entire reason we stopped shopping integrator bundles."

- Liang Chen, Systems Director

Field Report: a new-build residential complex in Prague, where 8,625 units of the WF-C3588-E7 board are being provisioned as building gateways

Reporter Yu Cheng, on the ground in Prague, Czech Republic. The developer placed one WF-C3588-E7 gateway unit in every apartment riser. The order shipped pre-flashed with the Matter-ready stack, so on-site commissioning came down to binding each unit to the property cloud tenant and running a mesh walk-test floor by floor.

Pallet weights were checked against the packing list at the dock, and the container was sealed 25 minutes before the cut-off.

The inspection confirmed three things on the spot: the WF-C3588-E7 units hold the burn-in with a yield above 99.35 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with CTU radio interface notification administered by CTU, cleared for entry at Port of Hamburg as the inland gateway on the Hamburg to Ningbo lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that Czech Republic importers can hand straight to their customs broker.

Filed by Yu Cheng, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-E7 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-E7 (Custom Edge AI Computing Board) as the lead SKU for Prague and Czech Republic programmes:

• Retail analytics box: a mall operator counts dwell time and demographics locally across hundreds of fanless nodes.
• Factory vision retrofit: an assembly line adds defect classification without touching the PLC, using the multi-model pipeline.
• Smart city intersection: a traffic programme runs vehicle and pedestrian analytics on one sealed node per junction.
• Power grid substation: a utility reads gauges and thermal cameras locally over dual GbE back to the SCADA room.
• Agriculture edge node: a farm runs crop and pest models offline where connectivity is seasonal at best.
• Healthcare kiosk analytics: a clinic chain triages queues with on-device vision and no personal data leaving the site.
• Campus safety system: a university estate runs perimeter and corridor analytics with local alarm relay.
• Transit hub appliance: a station operator streams platform analytics to a control room over the optional 5G seat.

Partnership Models for Prague Buyers

Three commercial structures are open to Prague buyers on the WF-C3588-E7 and the rest of the WF-C3588 custom variants:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

The three tiers share one factory, one test flow and one certification file. For Prague buyers the standard entry point on the WF-C3588-E7 is the 16GB + 64GB (WF-C3588-E7-C) configuration at MOQ 5,000 units per shipment, 1-3 days to sample on standard variants and 15-30 days to mass production.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: Practically the layers that decide whether the board fits your product: the PCB layout and outline, the memory and storage fit (4GB to 32GB LPDDR4X/LPDDR5, eMMC to 128GB plus NVMe or SATA), the display interface mix (HDMI 2.1, DP 1.4, LVDS/eDP/MIPI), the I/O bank (CAN, RS232/RS485 multi-serial, relays, digital I/O), the wireless stack, and the enclosure or DIN-rail chassis. On top of that sit the firmware options: custom Android ROM with a locked launcher, custom Linux or Yocto image, pre-installed applications, custom boot animation and OTA updates. A Czech Republic buyer can start from a standard WF-C3588 variant and change one layer, or bring a full schematic and have the carrier designed from scratch.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Yes. Under NDA, AndroidSBC delivers custom Android ROM work with proprietary services and a locked launcher, custom Linux images on Ubuntu, Debian, Yocto or Buildroot, BSP ports for customer carriers, and driver development for project-specific I/O. Source access is released to the partner, and the port is performed at Longgang, which matters because a vendor BSP rarely matches a custom carrier revision on the first try.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: The NPU is fully open on the custom line. Bring the model in PyTorch, ONNX, TensorFlow or Caffe and the Longgang desk handles the RKNN quantization, the runtime integration and the validation against your board's thermal and memory profile. Custom AI algorithm integration is a standard line item on the ODM scope, and the resulting model ships embedded in the firmware image burned per lot.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: Standard-variant samples ship in 1-3 days from stock, so your engineering team can start integration while the custom scope is being quoted. A custom run follows a 15-30 day mass-production window after schematic and stack-up sign-off. MOQ is 5,000 units per shipment on standard variants; on custom configurations the MOQ is negotiable against volume commitments, and small batch orders are accepted for pilot phases. A twelve-month framework agreement with monthly lot releases brings the per-lot MOQ down further.

What certifications does a custom board need for Czech Republic, and who handles them?

Answer: Yes, and the file travels with the goods. The pack covers CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 with the EMC and safety reports for your configuration, dated within the prior year. AndroidSBC confirms any Czech Republic-specific addition at quotation stage, which is the point where the answer is still useful rather than expensive.

How long will AndroidSBC keep supplying a custom board?

Answer: Seven years minimum supply, patches maintained across the firmware lines, OTA for firmware and NPU model updates. For a Czech Republic programme running a custom board in the field, that commitment is written into the agreement at signature, which is what separates a source factory from a catalogue reseller.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes, including DDP into Amazon FBA in the US, EU and Japan, plus 3PL consolidation points in Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Cartons are labelled to FBA inbound spec and the declaration names Longgang as the origin. Partners who consolidate in Hong Kong usually take FOB Yantian and handle the last leg themselves.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: AndroidSBC targets a 0.3 percent DOA rate across the WF-C3588 line, measured over the prior twelve months. On RMA, the partner returns the faulty WF-C3588-E7 unit to Longgang with its burn-in barcode, and a replacement ships within ten business days. Because the burn-in record and the configuration file are attached per unit, the failure analysis normally comes back with a root cause rather than a credit note, which matters when a custom configuration is holding up a production line.

Contact AndroidSBC: Start Your WF-C3588-E7 Sourcing Conversation

The AndroidSBC export desk handles all WF-C3588 enquiries from Prague and Czech Republic. Direct factory contact on the WF-C3588-E7 and the rest of the custom edge ai computing board line is available through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with CTU radio interface notification for Czech Republic, administered by CTU, entering at Port of Hamburg as the inland gateway on the Hamburg to Ningbo lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

OEM and ODM enquiries move fastest when the first message carries the annual volume, the customization scope and the Incoterm. Send those three and the export desk replies with a per-lot quote and the full WF-C3588 MOQ matrix inside two business days.