RK3588 4GB/8GB/16GB/32GB Custom RAM, WF-C3588-K4, AndroidSBC, Prague

TL;DR: RK3588 4GB/8GB/16GB/32GB Custom RAM

LONGGANG, Shenzhen, September 12, 2026 - A 13,700-unit WF-C3588-K4 order for Prague, Czech Republic completed burn-in and documentation at the Wanlin Longgang plant this week, the 239th lot released on the Rockchip RK3588 line.

AndroidSBC opens the custom RK3588 motherboard platform to overseas OEM buyers and industrial integrators serving Prague, Czech Republic. The WF-C3588 is a nine-variant custom programme rather than a catalogue of fixed part numbers, and the shape is deliberate. Custom Android, industrial, core board, signage, kiosk, robotics, NVR, edge AI and ARM PC projects all want the same silicon: 4x Cortex-A76 + 4x Cortex-A55 + 6 TOPS NPU + 8K decode, with a variant-specific I/O and thermal profile each. A Prague buyer can hold one supplier file, one documentation format and one MOQ structure across every custom variant.

About AndroidSBC and the Rockchip RK3588 Board Family

Wanlin Manufacturing Group has been building custom Android and Linux boards in Shenzhen since 2013, and AndroidSBC is the group's export-facing brand. The WF-C3588 is the current custom motherboard programme: nine variants on the same Rockchip RK3588 octa-core 8nm silicon with 6 TOPS NPU, 8K H.265 decode, dual Gigabit Ethernet and up to 32GB of LPDDR5. Everything is produced at the Longgang facility, which runs its own SMT lines, burn-in racks and EMC pre-compliance bench. Prague and Czech Republic buyers typically come to the WF-C3588 for one of three reasons: nine custom categories on one silicon, a source factory that takes OEM and ODM work seriously, or a supplier that carries the certification paperwork instead of leaving it to the importer.

WF-C3588-K4 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-K4 (Custom Kiosk and POS Terminal Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Czech Republic importers sourcing the WF-Series, the 8GB + 64GB (WF-C3588-K4-B) variant is the typical configuration for the custom self-service and POS programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom Kiosk and POS Terminal Board for Czech Republic Buyers

What breaks Czech Republic sourcing plans on the custom kiosk and pos terminal board line is not price negotiation, it is the second shipment. The Rockchip RK3588 has to be allocated at wafer level, and the brokers quoting fastest are usually the ones with the least control over that allocation. The software side is the second exposure. A board that boots on the bench is not the same as a board that carries the certified stack a Czech Republic channel will accept, and the difference usually shows up during inbound inspection rather than at the factory gate.

The third issue is documentation. Some factories stamp the CE mark without the Declaration of Conformity and the Technical File behind it, and the container then sits at the port while the importer tries to reconstruct a test report from a supplier who has already been paid. AndroidSBC closes the loop at the source factory: custom configuration assembled, certified image burned, burn-in barcode attached per unit, Technical File issued with the lot. The nine WF-C3588 variants cover self-service kiosks, ordering terminals, checkout systems, vending machines, parcel lockers, smart lockers, unattended retail, and POS registers and each ships in three memory configurations, so most Prague requirements can be met from standard stock rather than a from-scratch run.

Buyers in Czech Republic tend to ask about the local mark before they ask about price. In the Czech Republic the industrial base buys through technical distributors, and the CE file is reviewed locally rather than accepted on the manufacturer declaration alone. AndroidSBC handles that by preparing the destination-market file covering CE marking with CTU radio interface notification administered by CTU alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the lot routed through Port of Hamburg as the inland gateway on the Hamburg to Ningbo lane.

Competitive Comparison: WF-C3588-K4 vs Competing RK3588 Boards

Competing boards in the custom kiosk and pos terminal board category sort into three camps: cheap catalogue boards with no customization, re-badge imports with a sticker but no engineering file, and source-factory custom boards with the BSP, the certification and the test bench in one building. The WF-C3588-K4 is in the last camp, and its edge is Rockchip RK3588 plus a factory that will route the I/O the project actually needs.

• vs standard SBCs in kiosks: the WF-C3588-K4 arrives with the serial bank, the payment profile and the kiosk ROM already in place, so the integrator does not build a stack from parts.
• vs POS chipset vendors: the 6 TOPS NPU adds vision features on the same board that runs the till, without a second compute module.
• vs turnkey terminal importers: the board-level customization path lets a kiosk brand change the I/O and the firmware without changing the terminal factory.
• vs unbranded boards: per-unit barcodes and burn-in records give the estate a real RMA trail instead of a swap-and-hope process.

Global Custom Kiosk and POS Board Market Trends

The Custom Kiosk and POS Board curve is what Czech Republic importers read before committing to a custom kiosk and pos terminal board programme. The number they quote is the Edge AI hardware segment at USD 26.9 billion in 2025 with a 32.7 percent CAGR to USD 108.2 billion by 2030 (MarketsandMarkets, Edge AI Hardware Market Report, 2025-2030), which serves as the closest public proxy for the silicon demand behind custom RK3588 boards. For Prague that resolves into three demand patterns across the WF-C3588 order book:

• Self-service ordering kiosk: a QSR estate runs ordering terminals with a locked launcher and nightly OTA updates.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-K4 board carries that headroom without a board change.
• Smart vending machine: an operator adds shelf-camera stock checks with the NPU and cuts route visits by a third.

The read across the Custom Kiosk and POS Board channel is that buyers are consolidating suppliers: fewer vendors, wider platform coverage per vendor, and a longer contract behind each order.

Across those three segments, Prague procurement has been shifting from spot quotes to framework agreements with a one-lot-per-month cadence, particularly where a custom Android, industrial, signage or robotics programme needs a twelve-month shipping window.

Partner Success Story: Trident Vending in Prague, Czech Republic

Trident Vending, a smart vending operator serving the Czech Republic market, deployed 5,400 custom WF-C3588-K4 vending machine boards for an unattended retail estate. The rollout covered the self-service ordering kiosk, smart vending machine, and age-gate terminal workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 5,400 custom WF-C3588-K4 vending machine boards for an unattended retail estate
• Region: Prague, Czech Republic
• Models used: WF-C3588-K4 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Shekou with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Hamburg as the inland gateway via the Hamburg to Ningbo lane

"The shelf-camera stock check on the NPU cut our route visits by a third, and the multi-serial profile drives the coin and note units without adapter boxes. When a board does fail, the burn-in barcode gets us a root-cause note with the replacement."

- Marco Bellini, IT Infrastructure Lead

Field Report: a new-build residential complex in Prague, where 13,700 units of the WF-C3588-K4 board are being provisioned as building gateways

Reporter Wang Qiang, on the ground in Prague, Czech Republic. The developer placed one WF-C3588-K4 gateway unit in every apartment riser. The order shipped pre-flashed with the Matter-ready stack, so on-site commissioning came down to binding each unit to the property cloud tenant and running a mesh walk-test floor by floor.

The line supervisor logged a 41-minute changeover between the WF-C3588-K4 run and the next lot, which is the kind of number that decides whether a mid-quarter top-up order can be absorbed.

The inspection confirmed three things on the spot: the WF-C3588-K4 units hold the burn-in with a yield above 98.94 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with CTU radio interface notification administered by CTU, cleared for entry at Port of Hamburg as the inland gateway on the Hamburg to Ningbo lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that Czech Republic importers can hand straight to their customs broker.

Filed by Wang Qiang, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-K4 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-K4 (Custom Kiosk and POS Terminal Board) as the lead SKU for Prague and Czech Republic programmes:

• Self-service ordering kiosk: a QSR estate runs ordering terminals with a locked launcher and nightly OTA updates.
• Checkout and POS register: a retail chain drives the register, the scanner bank and the payment terminal from one board.
• Smart vending machine: an operator adds shelf-camera stock checks with the NPU and cuts route visits by a third.
• Parcel locker bank: a locker network runs door control and a camera per bay on the multi-serial I/O profile.
• Ticketing kiosk: a transit operator prints tickets and reads QR passes on an offline-capable terminal.
• Age-gate terminal: a licensed venue runs on-device face age estimation with no cloud round trip.
• Unattended retail store: a smart store runs entry gates, shelf cameras and checkout analytics on one board class.
• Queue analytics display: a bank branch counts queues locally and posts wait times to the lobby screen.

Partnership Models for Prague Buyers

AndroidSBC opens the WF-C3588 to Czech Republic partners through three structures, and a single agreement can draw on more than one:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

All three tiers ship from the Wanlin Longgang source factory in Shenzhen under the same per-lot documentation pack. For Prague buyers, a typical first order on the WF-C3588-K4 is the 8GB + 64GB (WF-C3588-K4-B) configuration at MOQ 5,000 units per shipment, with standard-variant samples in 1-3 days and 15-30 days to mass production on custom runs.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: The customization scope runs across five layers: hardware (PCB, PCBA, I/O, memory, storage), thermal (fanless passive, vented, wide-temperature, conformal coating), software (custom ROM, custom Linux, pre-installed apps, OTA), branding (logo, packaging, boot animation, SKU labels), and compliance (the certification file assembled for the exact configuration you ship). Most Czech Republic partners change two or three layers on a standard variant rather than commissioning a full custom run.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Custom ROM, custom BSP and custom SDK work are all part of the ODM tier. AndroidSBC builds the Android image (12, 13, 14 or 15, GMS or AOSP), ports the Linux BSP to your carrier revision, and releases the SDK modules your team needs under NDA. The engineering desk carries the port itself, so a Czech Republic integrator is not left debugging an unmodified vendor BSP against a carrier it was never designed for.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: The NPU is fully open on the custom line. Bring the model in PyTorch, ONNX, TensorFlow or Caffe and the Longgang desk handles the RKNN quantization, the runtime integration and the validation against your board's thermal and memory profile. Custom AI algorithm integration is a standard line item on the ODM scope, and the resulting model ships embedded in the firmware image burned per lot.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: Standard-variant samples ship in 1-3 days from stock, so your engineering team can start integration while the custom scope is being quoted. A custom run follows a 15-30 day mass-production window after schematic and stack-up sign-off. MOQ is 5,000 units per shipment on standard variants; on custom configurations the MOQ is negotiable against volume commitments, and small batch orders are accepted for pilot phases. A twelve-month framework agreement with monthly lot releases brings the per-lot MOQ down further.

What certifications does a custom board need for Czech Republic, and who handles them?

Answer: Yes, and the file travels with the goods. The pack covers CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 with the EMC and safety reports for your configuration, dated within the prior year. AndroidSBC confirms any Czech Republic-specific addition at quotation stage, which is the point where the answer is still useful rather than expensive.

How long will AndroidSBC keep supplying a custom board?

Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android and Linux firmware tracks and OTA infrastructure for pushing firmware and RKNN model updates to deployed units. Long-lifecycle programmes in industrial, signage and robotics usually ask for the term in writing, and it is written.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton labelling and pallet configuration follow FBA inbound requirements, the export declaration names the Wanlin Longgang source factory as the place of origin, and each pallet carries a per-unit barcode that traces back to the burn-in record for downstream RMAs.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: AndroidSBC targets a 0.3 percent DOA rate across the WF-C3588 line, measured over the prior twelve months. On RMA, the partner returns the faulty WF-C3588-K4 unit to Longgang with its burn-in barcode, and a replacement ships within ten business days. Because the burn-in record and the configuration file are attached per unit, the failure analysis normally comes back with a root cause rather than a credit note, which matters when a custom configuration is holding up a production line.

Contact AndroidSBC: Start Your WF-C3588-K4 Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-C3588 custom board line. Buyers in Prague and Czech Republic looking to source the WF-C3588-K4 straight from the source factory can use any of the following:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with CTU radio interface notification for Czech Republic, administered by CTU, entering at Port of Hamburg as the inland gateway on the Hamburg to Ningbo lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

Custom board enquiries move fastest when the first message carries three things: annual volume, customization scope and Incoterm. With those in hand the export desk returns a per-lot quote and the WF-C3588 MOQ matrix inside two business days.